Posts Tagged ‘Install’
If your property has a crawlspace, there could arrive a time when you need to have to exchange some or all of the insulation under the flooring. Usually, insulation will very last for the life of the residence but it will require to be changed if the batts get damp or if it is falling down because of to decomposition or destroyed by rodents. This is with no a doubt one particular of the most unpleasant tasks a home owner will experience, but if you want to conserve a great deal of money and even far more importantly, get it carried out correct, then doing it yourself is the way to go.
The first thing you require to do is get prepared to enter the crawlspace. It is always preferable to do this in the winter season when all the snakes and other critters are asleep, that way you avoid shocking each and every other. Next you require to get dressed. Put on a hat, glasses, coveralls, tube socks and sneakers. You will also want to use gloves and a dust mask. Keep in mind, you will wallowing around on your stomach and back again in a very dirty, dusty and fiberglass stuffed setting.
Whether you are replacing an old ceiling or installing a new ceiling for the first time. This how to guide will walk you through the step-by-step process. This project will require two people to position and place the drywall on the ceiling before it can be fasten to the joist. The most difficult part of the project will be taping the seams and applying joint compound. With a little practice this can be accomplished without too much difficulty.
Materials and Tools Required:
2×4’s to construct 2 T-braces
Drywall screws
8” drywall knife
4” drywall knife
Drywall tape (self-sticking fiber glass tape)
Joint Compound
Electric screwdriver
Utility knife
4’x8’ sheets of ½” drywall
Measuring tape
Straight edge
Hammer & Nails (construct T-braces)
Dust mask